Read entire label before using.
As a grinding aid, spray as needed with pump sprayer on area to be grinded. SNG begins working immediately. Grind as usual. Add more as needed. No additional steps are necessary. May be used as a grinding aid for most types of glue removal that don't need heavy remediation.
For intense/thick glue removal,
Saturate surface with water. Spray SNG at a minimum of 350sqft/gal. Scrub the entire area thoroughly with a stiff broom or mechanical scrubber. Do not let dry. Add more water to surface if needed, avoiding puddling. Cover with plastic overnight to keep from drying if necessary. Upon return, remove plastic and broadcast sand to rejection. Scrape and dispose of contamination. Rinse or clean with auto scrubber. Grind as usual.
Thick glue may take 3 to 4 hours or overnight for the microbes to completely digest all the contamination. Upon completion, rinse thoroughly with clean water and wet vac or auto-scrub the microbes from the floor.
Microbes do not etch concrete, contain no caustics or acids and are PH Neutral.
Coverage: 350 sqft/gal
Cleaning of Equipment:
Rinse pump up sprayer with regular tap water, warm or cold. Product may be stored in sprayer short term.
AVOID EYE CONTACT
ALWAYS TEST PRODUCT
